記事一覧

How to use [Step 2]

Back
How to move trains

[Step 2]Trains
[Step2-1]
Read the "01 Dummy bone for the run.pmx".
And this model set a first curve end.
(ex 1m=12.5 25m=312.5 Coordinate of MMD)
s2939.png

[Step2-2]
Load a train model.
And this model OP set Joint bone of Dummy bone.
s2938.png

[Step2-3]
Model manipulation set Dummy bone model.
And to set the 1C-Right of Facial manipulation to 0.2.
(1C-Right:1st Curve Right)
(0.2: This Curve radius is 200m. If you make 400m curve, Please set 0.4.)
s2940.png

[Step2-4]
To set the 1C-CW(1St Curve clockwise) of Facial manipulation to 1.0.
s2941.png

[Step2-5]
Please open the "Key frame list.pdf".
This Curve radius is 200m, So Frame manipulation set 628 frame.
And to set the 1C-CW of Facial manipulation to 0.0.
s2942.png

The motion of the first curve was completed.
Then, I make the motion of the straight line.

[Step 2-6]
To set the 1C-Straight of Facial manipulation to 0.0.
Please again open the "Key frame list.pdf".
I got the tangent at 25m.
So Frame manipulation set 628+45=673 frame.
And to set the 1C-Straight of Facial manipulation to 0.025.
s2943.png

[Step2-7]
I make the second curve motion.
I made the radius of the second curve with 200m.
So to set the 2C-Left of Facial manipulation to 0.2.
And to set the 2C-CW of Facial manipulation to 0.0.
s2944.png

[Step 2-8]
Please again open the "Key frame list.pdf".
So Frame manipulation set 673+628=1301 frame.
And to set the 2C-CW of Facial manipulation to 1.0.
A train begins to work when click a Play button.
s2945.png
The next moves the second car.
Next

スポンサーサイト

コメント

コメントの投稿

非公開コメント